FABRICATION

PRICE $1500

• Made from (schedule 40) ranging 1.315” – 2.375” OD either hollow steel or hollow aluminum
• Pipe length can range from  1’-0” – 4’-0”
• Connection points ranging #6 – #9 corner kee clamps, depending on pipe size (breaking load 1500lbs)
• Apparatus completely disassemble for ease of travel
• Rig requires, ¼” alley key and torch wrench to apply proper set screw pressure (canadian tire)
• Weight of unit is dependent on material used

PRICE $300 – 500

• Made from either:
– (schedule 40) ranging 1.050” – 1.900” OD hollow steel
– solid steel ranging .750” – 1.000”
• Hoop standard range from 24’ – 42” but can discuss going beyond standard limit
• Tab or tabless
• Weight of unit is dependent on material used

PRICE $1200

• Hollow steel insert (schedule 40) 1.315” OD
• Can be sleeved in brass or chrome (wall thickness .050”)
• Please note sleeves are not sold in Canada and require a brokerage fee at border
• Total pipe OD 1.365
• Pipe length can range from 8’ – 16’
• (¼”) steel 8” round base plate welded to hollow steel at bottom, with rated bolt
• (⅜”) steel wire rope ran through complete system for rigging point, (copper crimping)

PRICE $1200

• Hollow steel insert (schedule 40) 1.315” OD
• With rigging attachment welded on top
• Can be sleeved in brass or chrome (wall thickness .050”)
• Please note sleeves are not sold in Canada and require a brokerage fee at border
• Total pipe OD 1.365
• Pipe length can range from 8’ – 10’
• (¼”) steel 12” base plate with welded flange on accommodate rotating point at bottom of pole
*please note slip mat is not provided, must be use to avoid sliding when in use

PRICE (dance/static) $150

• Made from (schedule 40) ranging 1.050” – 1.660” OD hollow steel
• Standard range from 24” – 36” but can discuss going beyond standard limit
• Tabbed
• Weight of unit is dependent on material used
• Leads not provided

PRICE $800

• ¼” steel square plate, size can range from 12” – 18” squared
• ½” bolt holes, properly sized (4-6 locations)
• 8” cleat welded
• ½” x 6” rated bolts (4-6 required)
• Seismic rated glue
• Site inspection is required
• Must be in a vertical position, cannot be mounted horizontally and requires ground anchor as back up